4-Door, SuperCab

SEAT - REAR, 4-DOOR, SUPERCAB

Exploded View

2-Door SuperCab:

Removal and Installation
1. Remove the rear seat covers.
1 Remove the jack cover.
2 Remove the pin-type retainer.
3 Remove the outboard trim cover.
4 Remove the inboard trim cover.







2. Remove the safety belt bolt and safety belt.
- To install, tighten to 40 Nm (30 lb-ft).







3. Remove the 5 seat-to-floor bolts and remove the rear seat.
- To install, tighten to 23 Nm (17 lb-ft).

4. To install, reverse the removal procedure.
- Make sure the safety belts and buckles are accessible to the occupants after installation.