Dimmer Switch: Service and Repair

INSTRUMENT PANEL DIMMER SWITCH







Removal and Installation
1. Remove the radio.
2. Remove the center instrument panel finish panel.
- Remove the 2 screws.
- Disconnect the electrical connectors.

3. Remove the 2 bolts and position aside the hood latch release handle.
4. Remove the 2 screws and remove the instrument panel steering column cover.
5. Remove the 5 bolts and the lower instrument panel reinforcement.
- To install, tighten to 11 Nm (8 lb-ft).

6. If equipped, position the column-mounted transmission range selector lever to the lowest position.
7. Remove the instrument cluster finish panel.
- Remove the 5 screws.
- Disconnect the electrical connectors.

8. Remove the 2 screws and the instrument panel dimmer switch.
9. To install, reverse the removal procedure.