Test J: One Turn Signal/Hazard Lamp Is Inoperative/Always On

PINPOINT TEST J: ONE TURN SIGNAL/HAZARD LAMP IS INOPERATIVE/ALWAYS ON

Normal Operation
When the multifunction switch is placed in the LH or RH TURN position, the multifunction switch routes the voltage to the LH or RH front turn lamps through circuits CLS41 (GY/YE) and CLS39 (VT/WH), respectively. The multifunction switch also routes the voltage to the LH or RH rear lamps through the existing stoplamp circuitry. Ground for the indicator flasher relay is provided through circuit GD161 (BK/YE).

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Multifunction switch

J1-J5: