Test B: DTC B1359 - No Power In ACC

Pinpoint Test B: DTC B1359 - No Power in ACC
Refer to Vehicle/Diagrams, Power Distribution/SJB for schematic and connector information.

Normal Operation
The ignition switch ACC circuit provides fused battery voltage along circuit CDC33 (VT/GN) to the smart junction box (SJB) when the key is in the ACC position.
^ DTC B1359 Ignition RUN/ACC Circuit Failure
- If, during normal operation the SJB detects an open or a short to ground in the RUN or ACC circuit, DTC B1359 will be set. The DTC will also be set if the SJB does not detect the RUN signal during the on-demand self test.

This pinpoint test is intended to diagnose the following:
^ Wiring, terminals or connectors
^ Ignition switch
^ SJB

B1: