Front Door Window Glass: Service and Repair
WINDOW GLASS - FRONT DOORExploded View
Special Tool(s)
Special Tool(s):
Removal and Installation
NOTE: Position the window glass halfway up to gain access to the rivets.
1. Remove the front door trim panel.
2. Remove the watershield.
3. Remove the door glass channel.
- Remove the bolt.
- To install, tighten to 12 Nm (9 lb-ft).
4. NOTE:
- Support window glass before removing the rivets.
- To remove the rivets, use a drift punch to remove the steel centers and a 6 mm (1/4 in) diameter drill bit to remove the rivets.
Remove the 2 window glass rivets.
5. Remove the front door window glass through the window opening.
6. To install, reverse the removal procedure.
- Use a heavy duty riveter to install the new rivets.