Battery Cable: Service and Repair

BATTERY CABLES

LH Battery Cable Connections (Part 1):

LH Battery Cable Connections (Part 2):

LH Battery Cable Engine Connections (Part 1):

LH Battery Cable Engine Connections (Part 2):

Battery Cable Generator Connections:

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery.
3. Remove the bolt and position the battery cable body ground terminal aside.
- To install, tighten to 12 Nm (9 lb-ft).

4. Release the 3 battery cable locators from the battery tray and fender.

5. Remove the battery junction box (BJB) cover, remove the 2 nuts and position the BJB terminal aside.
- To install, tighten to 12 Nm (9 lb-ft).

6. Disconnect the battery cable connector located on the fenderwell.
7. If equipped, disconnect the A/C compressor electrical connector.
8. If equipped, disconnect the A/C compressor cut-off switch connector.
9. Remove the bolt and position the battery cable engine bracket aside.
- To install, tighten to 25 Nm (18 lb-ft).

10. Disconnect the oil pressure switch electrical connector.
11. Release the battery cable locator.
12. Remove the starter solenoid terminal cover.
13. Remove the bolt and position the battery cable starter solenoid terminal aside.
- To install, tighten to 12 Nm (9 lb-ft).

14. Remove the nut and position the battery cable starter solenoid wire terminal aside.
- To install, tighten to 5 Nm (44 lb-in).

15. Remove the nut and position the battery cable engine ground terminal aside.
- To install, tighten to 27 Nm (20 lb-ft).

16. Remove the bolt from the front of the LH cylinder head which holds the harness bracket in place.
- To install, tighten to 5 Nm (44 lb-in).

17. Release the battery cable locator from the generator bracket.
18. Disconnect the 2 generator electrical connectors.
19. Position the generator B+ protective cover aside, remove the nut and position the battery cable generator B+ terminal aside.
- To install, tighten to 8 Nm (71 lb-in).

20. Remove the battery cable.
21. To install, reverse the removal procedure.