Alternator: Service and Repair

GENERATOR







Removal and Installation
1. Disconnect the battery.
2. Remove the air cleaner outlet pipe.
3. Rotate the front end accessory drive (FEAD) belt tensioner counterclockwise and position the accessory drive belt aside.
4. Disconnect the 2 electrical connectors from the generator.
5. Position the protective cover aside, remove the nut and position the generator B+ terminal aside.
- To install, tighten to 8 Nm (71 lb-in).

6. Remove the 2 bolts from the generator.
- To install, tighten to 47 Nm (35 lb-ft).

7. Remove the stud bolt, position the generator harness bracket aside and remove the generator.
- To install, tighten to 47 Nm (35 lb-ft).

8. To install, reverse the removal procedure.