Dome Lamp: Service and Repair
INTERIOR LAMPFront Interior Lamp:
Second or Third Row Interior Lamp:
Removal and Installation
Front Interior Lamp
1. NOTE: Do not pull down on the front of the overhead console.
Pull down on the rear of the overhead console to remove the overhead console from the retaining clips.
- Disconnect the electrical connectors.
2. Release the 4 retaining clips, and remove the lamp assembly from the overhead console.
3. Release the 6 retaining clips, and remove the lens from the lamp assembly.
- NOTE: The bulbs can be pushed out from the backside of the lamp assembly.
Replace the bulb(s) as necessary.
Second or Third Row Interior Lamp
4. Remove the interior lamp lens.
5. Release the 2 retaining clips (through the access holes) and remove the interior lamp.
- Disconnect the electrical connector.
All interior lamps
6. To install, reverse the removal procedure.