Spark Plug: Service and Repair

SPARK PLUGS

Exploded View

LH Side:

RH Side:

Removal
1. Remove the ignition coil-on-plugs for the spark plugs being serviced. Refer to Ignition Coil-On-Plug.

2. CAUTION: Only use hand tools when removing or installing the spark plugs, or damage may occur to the cylinder head or spark plug.

NOTE: Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.

Remove the 6 spark plugs.

Installation
1. Inspect the 6 spark plugs.

2. Adjust the spark plug gap as necessary.

3. CAUTION: Only use hand tools when removing or installing the spark plugs, or damage may occur to the cylinder head or spark plug.

Install the 6 spark plugs.
- Tighten to 15 Nm (11 lb-ft).

4. Install the ignition coil-on-plugs. Refer to Ignition Coil-On-Plug.