Heated Oxygen Sensor (HO2S)
HEATED OXYGEN SENSOR (HO2S)Exploded View
RH Sensors:
LH Sensors:
Special Tool(s)
Special Tool(s):
Removal and Installation
1. Disconnect the heated oxygen sensor (HO2S) electrical connector.
2. NOTE: If necessary, lubricate the sensor threads with penetrating and lock lubricant to assist in removal.
Using the special tool, remove the HO2S.
- To install, tighten to 48 Nm (35 lb-ft).
3. NOTE: Apply a light coat of anti-seize lubricant to the threads of the HO2S.
To install, reverse the removal procedure.