Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2009 >> Crown Victoria V8-4.6L >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Service and Repair >> Speed Control Deactivator Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Speed Control Deactivator Switch




Speed Control Deactivator Switch









Removal

NOTICE: Do not press the pedal when removing or installing the speed control deactivator switch, as the switch will be damaged.

1. Disconnect the speed control deactivator switch electrical connector.

2. Rotate counterclockwise 45 degrees and remove the speed control deactivator switch.

Installation

NOTE: The speed control deactivator switch is self-adjusting. Do not pull up or push-down on the brake pedal during installation. The switch will only self-adjust one time and allows for only the initial installation. If further adjustment becomes necessary, a new switch must be used.

1. Install the speed control deactivator switch, and rotate clockwise 45 degrees.

2. Connect the speed control deactivator switch electrical connector.

pro multis · About Operation CHARM