Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2009 >> E 250 V8-5.4L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair >> Ignition Coil-On-Plug
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil-On-Plug




Ignition Coil-On-Plug





Removal and Installation

1. Remove the engine cover.

2. Remove the Air Cleaner (ACL) assembly.

3. Disconnect the ignition coil electrical connector.

4. NOTE: Use a twisting motion while pulling up on the ignition coil.

Remove the bolt and the ignition coil.

- To install, tighten to 6 Nm (53 lb-in).

5. NOTE: Verify that the ignition coil spring is correctly located inside the ignition coil boot and that there is no damage to the tip of the boot.

To install, reverse the removal procedure.

- Apply a light coat of dielectric compound to the inside of the coil boots prior to installation.

pro multis · About Operation CHARM