Removal and Replacement

Oil Pump





Removal

1. Remove the crankshaft front seal. For additional information, refer to Crankshaft Front Seal Service and Repair.

2. Remove the 5 bolts and the oil pump cover.
- Remove and discard the O-ring seal.





3. NOTE: Mark the front of the inner and outer gerotors for correct reassembly.

Remove the inner and outer gerotors.





4. Inspect the oil pump components. Install new components, as necessary.
- Inspect the oil pump for excessive metal particles.

- Inspect the oil pump for gouges, cracks or deep scratches.

- Inspect the oil pump inner and outer gear rotors for damage or excessive wear.

Installation

1. NOTE: Install the gears with marks pointing outward.

Lubricate the inner gear with clean engine oil and install onto the crankshaft. Lubricate the outer gear with clean engine oil and mesh with the inner gear rotor in the oil pump housing.





2. NOTE: Install a new O-ring seal.

Install the oil pump cover and 5 bolts.

- Tighten to 13 Nm (115 lb-in).





3. Install the crankshaft front seal. For additional information, refer to Crankshaft Front Seal Service and Repair.