Pinpoint Tests AM: The Turn Signal On Warning Chime Is Inoperative

Instrumentation, Message Center and Warning Chimes

Pinpoint Tests

Pinpoint Test AM: The Turn Signal On Warning Chime Is Inoperative

Normal Operation

The turn signal on warning chime sounds when the vehicle travels more than 3.2 km (2.0 miles) with the turn signal on. The Smart Junction Box (SJB) communicates the turn signal switch status to the Instrument Cluster (IC) over the Medium Speed Controller Area Network (MS-CAN). The PCM communicates the odometer count data to the IC over the High Speed Controller Area Network (HS-CAN).

This pinpoint test is intended to diagnose the following:

- IC



PINPOINT TEST AM: THE TURN SIGNAL ON WARNING CHIME IS INOPERATIVE

-------------------------------------------------
AM1 CHECK THE TURN SIGNAL INDICATORS OPERATION


- Ignition ON.
- Verify the turn signal indicators operation.
- Do the turn signal indicators operate correctly?

Yes
GO to AM2.

No
Go To Pinpoint Test R. Pinpoint Test R: The LH/RH Turn Signal Indicator Is Never/Always On

-------------------------------------------------
AM2 CHECK THE ODOMETER FOR CORRECT OPERATION


- Verify that the odometer operates.
- Does the odometer operate correctly?

Yes
INSTALL a new IC. REFER to Instrument Cluster (IC) Instrument Cluster (IC). TEST the system for normal operation.

No
Go To Pinpoint Test J. Pinpoint Test J: The Odometer Is Inoperative

-------------------------------------------------