Dome Lamp: Service and Repair

Interior Lamp

Front










Rear









Removal and Installation

Front

1. NOTE: Do not pull down on the front of the overhead console.

Pull down on the rear of the overhead console to remove the overhead console from the retaining clips.

- Disconnect the electrical connectors.

2. Release the 4 retaining clips and remove the lamp assembly from the overhead console.





3. Release the 6 retaining clips and remove the lens from the lamp assembly.
- NOTE: The bulbs can be pushed out from the backside of the lamp assembly.

Replace the bulb(s) as necessary.





Rear

4. Remove the interior lamp lens.





5. Release the 2 retaining clips (through the access holes) and remove the interior lamp.
- Disconnect the electrical connector.





Any interior lamps

6. To install, reverse the removal procedure.