Removal and Replacement

Bumper Cover - Front

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the 2 bolts from the top of the radiator grille.





3. Remove the 4 scrivets from the top of the radiator grille.





4. Remove the 3 lower pin-type retainers.





5. Remove the 6 fender splash shield screws (3 each side).





6. Remove the 4 lower screws (2 each side).





7. Disconnect the side marker lamp electrical connectors, if equipped.





8. If equipped, disconnect the fog lamp electrical connectors.





9. Remove the front bumper cover.
- Pull the corner of the bumper cover from the bracket.





10. To install, reverse the removal procedure.