Solenoid Hydraulic Circuits

Hydraulic Circuits

Solenoid Hydraulic Circuits

LINE pressure from the pump is directed to the individual shift, TCC and LPC solenoids by the solenoid regulator valve on the SOL FEED circuit. The solenoids, controlled by the PCM, direct the fluid to the valves that they control.

The LPC solenoid sends varying pressure to the line pressure regulator valve to control line pressure.

In PARK position, Shift Solenoid D (SSD) directs pressure to the low/reverse/overdrive (4, 5, 6) regulator and boost valves through the SSD SIG hydraulic circuit. Shift Solenoid E (SSE) directs pressure to the multiplex shift valve to direct regulated pressure from the low/reverse/overdrive (4, 5, 6) regulator valve to the low/reverse clutch.





In REVERSE position, SSD directs pressure to the low/reverse/overdrive (4, 5, 6) regulator and boost valves through the SSD SIG hydraulic circuit. SSE directs pressure to the multiplex shift valve to direct regulated pressure from the low/reverse/overdrive (4, 5, 6) regulator valve to the low/reverse clutch. Shift Solenoid B (SSB) directs pressure to the direct (3, 5, R) regulator and boost valves through the SSB SIG hydraulic circuit to apply the direct (3, 5, R) clutch.





In NEUTRAL position, SSD directs pressure to the low/reverse/overdrive (4, 5, 6) regulator and boost valves through the SSD SIG hydraulic circuit. SSE directs pressure to the multiplex shift valve to direct regulated pressure from the low/reverse/overdrive (4, 5, 6) regulator valve to the low/reverse clutch.





In 1st gear, Shift Solenoid A (SSA) directs pressure to the forward (1, 2, 3, 4) clutch regulator and boost valves through the SSA SIG hydraulic circuit to apply the forward (1, 2, 3, 4) clutch. SSD directs pressure to the low/reverse/overdrive (4, 5, 6) regulator and boost valves through the SSD SIG hydraulic circuit only when vehicle speed is below 5 km/h (3 mph). SSE directs pressure to the multiplex shift valve to direct regulated pressure from the low/reverse/overdrive (4, 5, 6) regulator valve to the low/reverse clutch only when vehicle speed is below 5 km/h (3 mph).





In 2nd gear, the forward (1, 2, 3, 4) clutch remains applied. Shift Solenoid C (SSC) directs pressure to the intermediate (2, 6) clutch regulator valve through the SSC SIG hydraulic circuit to apply the intermediate (2, 6) clutch.





In 3rd gear, the forward (1, 2, 3, 4) clutch remains applied. SSC releases pressure to the intermediate (2, 6) clutch regulator valve. SSB directs pressure to the direct (3, 5, R) regulator and boost valves through the SSB SIG hydraulic circuit to apply the direct (3, 5, R) clutch.





In 4th gear, the forward (1, 2, 3, 4) clutch remains applied. SSB releases pressure to the direct (3, 5, R) regulator and boost valves. SSD directs pressure to the low/reverse/overdrive (4, 5, 6) regulator and boost valves through the SSD SIG hydraulic circuit to apply the overdrive (4, 5, 6) clutch.





In 5th gear, the overdrive (4, 5, 6) clutch remains applied. SSA releases pressure to the forward (1, 2, 3, 4) regulator and boost valves. SSB directs pressure to the direct (3, 5, R) regulator and boost valves through the SSB SIG hydraulic circuit to apply the direct (3, 5, R) clutch.





In 6th gear, the overdrive (4, 5, 6) clutch remains applied. SSB releases pressure to the direct (3, 5, R) regulator and boost valves. SSC directs pressure to the intermediate (2, 6) clutch regulator valve through the SSC SIG hydraulic circuit to apply the intermediate (2, 6) clutch.