Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Instrument Panel Finish Panel - Center, Upper
Instrument Panel Finish Panel - Center, Upper
Removal and Installation
1. NOTE: The ignition switch must be in the OFF position if disconnecting the Passenger Air Bag Deactivation (PAD) indicator electrical connector. Otherwise, a DTC will be set in the Restraints Control Module (RCM) memory and must be cleared before releasing the vehicle.
Turn the ignition OFF and wait at least 1 minute.
2. Remove the upper instrument panel center finish panel.
- Pull the upper instrument panel center finish panel outward.
- Disconnect the electrical connector.
3. To install, reverse the removal procedure.
- Make sure to align the trim panel retaining clips to the retaining clip holes in the instrument panel.