TBCM

Diagnostic Trouble Code (DTC) Charts and Descriptions

Note: Refer to applicable diagnostic/repair information to diagnose the body and chassis DTCs.

U0101 (TBCM):

Note: 'x' equals any number 0 through 9 or letter A through F.

Note 1: Refer to Speed Control.

Note 2: Install a new transaxle. Refer to Automatic Transmission/Transaxle.

Note 3: Clear the transaxle control module (TCM) continuous DTCs. Repeat the self-test. If DTC P0613 is present again, install a new transaxle. Refer to Automatic Transmission/Transaxle.

Note 4: Verify that automatic transaxle fluid level is correct. If OK, install a new transaxle. Refer to Automatic Transmission/Transaxle.

Note 5: Clear the transaxle control module (TCM) continuous DTCs. Repeat the self-test. If DTC P0A1A is present again, install a new transaxle. Refer to Automatic Transmission/Transaxle.

Note 6: Clear the transaxle control module (TCM) continuous DTCs. Carry out a TCM KOEO on demand self-test. If DTC P0A90 is present again, install a new transaxle. Refer to Automatic Transmission/Transaxle. If the DTC is not present, concern can not be duplicated or identified at this time. Go to Pinpoint Test Z for intermittent diagnostics. Z - Intermittent

Note 7: Check for damaged or seized engine. If the engine is OK, install a new transaxle. Refer to Automatic Transmission/Transaxle.

Note 8: Clear the transaxle control module (TCM) continuous DTCs. Carry out a TCM KOEO on demand self-test. If DTC P0A92 is present again, check for damaged or seized engine, and install a new transaxle. Refer to Automatic Transmission/Transaxle. If the DTC is not present, concern can not be duplicated or identified at this time. Go to Pinpoint Test Z for intermittent diagnostics. Z - Intermittent

Note 9: DTC P1000 is ignored in the key on, engine off (KOEO) and key on, engine running (KOER) self-tests. Disregard DTC P1000 and continue as directed.