Roof Opening Panel Frame

Roof Opening Panel Frame

Removal and Installation

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system, including: whenever the roof opening panel motor has been removed from the roof panel system, the roof opening panel glass has been removed from the roof opening panel system, the roof opening panel assembly has been removed from the vehicle, a new roof opening panel motor has been installed, a new roof opening panel glass has been installed or a new roof opening panel assembly has been installed. For additional information, refer to Roof Opening Panel Motor Initialization Programming and Relearning.

1. Remove the headliner.

2. Disconnect the 4 roof opening panel drain hoses.

3. Release the wire harness locators.

4. Remove the 8 roof opening panel frame bolts and remove the roof opening panel frame.
- To install tighten to 9 Nm (80 lb-in).

5. To install, reverse the removal procedure.
- Verify that the roof opening panel glass is centered and aligned correctly. For additional information, refer to Roof Opening Panel Alignment Adjustments.

- Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization Programming and Relearning.