Coolant Pump

Coolant Pump - 3.0L (4V)









Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Service and Repair.

3. Remove the Air Cleaner (ACL) outlet pipe.

4. Disconnect the lower radiator hose from the thermostat housing.

5. Remove the coolant pump belt.

6. Remove the 3 bolts and the coolant pump.
- Remove and discard the gasket.

Installation

1. Using a new gasket, install the coolant pump and the 3 bolts.
- Tighten to 15 Nm (133 lb-in).

2. Install the coolant pump belt.

3. Connect the lower radiator hose to the thermostat housing.

4. Install the ACL outlet pipe.

5. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Service and Repair.