Transaxle Support Insulator - Lower, Rear

Transaxle Support Insulator - Lower, Rear, 3.0L DOHC









Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the lower support insulator.

1. Remove the lower support insulator through bolt.
- To install, tighten to 115 Nm (85 lb-ft).

2. Remove the lower support insulator bolt and 2 nuts.
- To install, tighten to 80 Nm (59 lb-ft).

3. Remove the lower support insulator.





3. To install, reverse the removal procedure.