Seat Backrest - Third Row, 60 Percent
Seat Backrest - Third Row, 60 Percent
Removal and Installation
NOTE: For parts identification and locations, refer to Seat - Exploded View, Third Row Seat - Exploded View, Third Row.
All seats
1. Remove the seat. For additional information, refer to Seat - Third Row Seat - Third Row.
2. Remove the 2 screws and inboard and outboard slide bracket covers.
3. Release the backrest cover lower and inboard J-clips.
Manual fold seats
4. Remove the manual seat cable.
1. Release the cable clamp.
2. Detach the cable end.
All seats
5. Remove the outboard slide bracket-to-backrest frame and outboard slide bracket-to-outboard latch nuts.
- To install, tighten to 15 Nm (133 lb-in).
6. Remove the inboard slide bracket-to-backrest frame and inboard slide bracket-to-inboard latch nuts.
- To install, tighten to 15 Nm (133 lb-in).
7. Separate the backrest from the seat and remove.
8. To install, reverse the removal procedure.