Oil Level Indicator and Tube

Oil Level Indicator and Tube













Removal and Installation

1. Remove the LH exhaust manifold. For additional information, refer to Exhaust Manifold - LH Exhaust Manifold - LH.

2. Remove the oil level indicator and tube bolt.
- To install, tighten to 10 Nm (89 lb-in).

3. Remove the oil level indicator and tube from the cylinder block.

4. Remove and discard the O-ring seal.

5. NOTE: Install a new oil level indicator tube O-ring seal and lubricate it with clean engine oil prior to installation.

To install, reverse the removal procedure.