Seat Backrest Cover - Third Row

Seat Backrest Cover - Third Row

Removal and Installation

1. Fold the backrest not being serviced down.

2. Release the backrest trim cover J-clip at the top of the trim cover by the head restraint.
- Pull the head restraint release strap through the backrest trim cover.

3. Remove the 2 head restraint-to-backrest frame bolts and remove the head restraint.
- To install, tighten to 25 Nm (18 lb-ft).

4. Remove 2 bolts and the hinge cover.

5. Remove 2 bolts and the latch cover.

6. Release the backrest trim cover lower J-clip.

7. NOTICE: Use care when separating the backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the backrest foam pad.

Release the backrest trim cover side J-clips, hook-and-loop strips, invert and remove the backrest trim cover.

8. To install, reverse the removal procedure.