Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2009 >> F 150 2WD V8-4.6L VIN W >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Control Solenoid >> Service and Repair >> Exhaust Gas Recirculation (EGR) System Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Exhaust Gas Recirculation (EGR) System Module




Exhaust Gas Recirculation (EGR) System Module - 4.6L (2V)

Removal and Installation

1. Disconnect the EGR system module electrical connector.

2. Disconnect the EGR system module vacuum connector.

3. Disconnect the exhaust manifold-to-EGR system module tube from the EGR system module.

4. Remove the 2 bolts, the EGR system module and the gasket. Discard the gasket.

Installation

1. NOTICE: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of the old gasket.

Clean the EGR system module gasket mating surfaces.

2. Install a new gasket with the raised circle facing the Throttle Body (TB) adapter.





3. Position the EGR system module and install the 2 bolts.
- Tighten to 25 Nm (18 lb-ft).

4. Connect the exhaust manifold-to-EGR system module tube to the EGR system module.
- Tighten to 40 Nm (30 lb-ft).

5. Connect the EGR system module vacuum connector.

6. Connect the EGR system module electrical connector.

pro multis · About Operation CHARM