Pinpoint Test K: The Autolock Does Not Operate Correctly
Locks, Latches and Entry Systems
Pinpoint Test K: The Autolock Does Not Operate Correctly
Normal Operation
The Smart Junction Box (SJB) energizes the lock relay based on input from the ajar switches, the ignition switch, the Transmission Range (TR) sensor and the vehicle speed signal. The SJB locks the doors when the following conditions are met:
- All the doors are closed
- The ignition switch is in the RUN position
- The vehicle is shifted into any gear putting the vehicle in motion, and
- The vehicle attains a speed greater than 20 km/h (12 mph).
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Programming
- Door ajar switches
- SJB
PINPOINT TEST K: THE AUTOLOCK DOES NOT OPERATE CORRECTLY
