Pinpoint Test A: The Instrument Cluster (IC) Is Inoperative
Instrumentation, Message Center and Warning Chimes
Pinpoint Test A: The Instrument Cluster (IC) Is Inoperative
Refer to Wiring Diagram Set 60, Instrument Cluster for schematic and connector information. Diagrams By Number
Normal Operation
With the ignition switch in the START or RUN position, the Instrument Cluster (IC) receives voltage from the Smart Junction Box (SJB) through circuit CBP29 (WH/VT). With the ignition switch in the OFF position, the IC receives its keep-alive voltage from the SJB through circuit SBP26 (YE/RD). The IC is grounded through circuit GD133 (BK).
This pinpoint test is intended to diagnose the following:
- Fuse(s)
- Wiring, terminals or connectors
- IC
PINPOINT TEST A: THE IC IS INOPERATIVE
NOTICE: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.
NOTE: Failure to disconnect the battery when instructed will result in false resistance readings. Refer to Battery.
