Wheel Speed Sensor - Rear

Wheel Speed Sensor - Rear

NOTE: Rear Wheel Drive (RWD) shown, Four-Wheel Drive (4WD) similar. LH shown, RH similar.










Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Disconnect the wheel speed sensor electrical connector.

3. Detach the wheel speed sensor harness retainers and pushpin retainers.

4. Remove the wheel speed sensor bolt and the wheel speed sensor.
- To install, tighten to 15 Nm (133 lb-in).

5. To install, reverse the removal procedure.