Pinpoint Test E: A Single Power Window is Inoperative - RH Rear

Glass, Frames and Mechanisms

Pinpoint Test E: A Single Power Window is Inoperative - RH Rear

Refer to Wiring Diagram Set 100, Power Windows for schematic and connector information. Diagrams By Number

Normal Operation

Under normal operation, the RH rear window control switch receives voltage from the LH front window control switch through circuit CPW14 (VT/WH) when the window lock switch is set to the UNLOCK position. The RH rear window control switch transfers voltage to the RH rear window motor through circuit CPW23 (GY) and ground through CPW24 (WH/VT) to operate the RH rear window downward. To move the RH rear window upward, the RH rear window control switch transfers voltage through circuit CPW24 (WH/VT) and ground through CPW23 (GY).

When operating the RH rear window from the LH front window control switch, voltage is sent to the RH rear window control switch through circuit CPW17 (BN/GN) and ground through CPW18 (GY/VT) to operate the RH rear window downward. To move the RH rear window upward, the LH front window control switch provides voltage through circuit CPW18 (GY/VT) and ground through CPW17 (BN/GN).

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- LH front window control switch
- RH rear window control switch
- RH rear window motor



PINPOINT TEST E: A SINGLE POWER WINDOW IS INOPERATIVE - RH REAR

E1-E3:

E3-E5:

E5-E6:

E6 Continued: