Pinpoint Test F: A Single Power Window is Inoperative - Power Sliding Rear Window

Glass, Frames and Mechanisms

Pinpoint Test F: A Single Power Window is Inoperative - Power Sliding Rear Window

Refer to Wiring Diagram Set 100, Power Windows for schematic and connector information. Diagrams By Number

Normal Operation

Under normal operation, voltage is supplied to the power sliding window control switch through circuit CBP47 (GN/BU) whenever the accessory delay relay is activated. Ground is supplied to the power sliding window control switch through circuit GD134 (BK/VT). The power sliding window control switch provides voltage to the power sliding window motor through circuit CPW59 (VT/BN) and ground through CPW58 (YE/OG) to operate the power sliding window to the OPEN position. The power sliding window control switch provides voltage through circuit CPW58 (YE/OG) and ground through CPW59 (VT/BN) to operate the power sliding window to the CLOSED position.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Power sliding window control switch
- Power sliding window motor



PINPOINT TEST F: A SINGLE POWER WINDOW IS INOPERATIVE - POWER SLIDING REAR WINDOW

F1-F4:

F4-F5:

F5 Continued: