Keyless Entry Key-Pad: Testing and Inspection

Keyless Entry Keypad Code Programming

Programming a Personal Code and Keypad Association to Memory Seats, Mirrors, Adjustable Pedals, and Steering Column (If Equipped)

1. NOTE: The permanent factory keyless entry keypad code cannot be erased.

Enter the permanent factory keyless entry keypad code.

2. Press the 1/2 button within 5 seconds to activate the programming mode.

3. Enter the new 5-digit personal keyless entry keypad code. Each number must be entered within 5 seconds of each other.

4. To associate the entry code with a memory setting, enter a sixth digit to indicate which driver should be set in a memory recalled by the personal entry code:
- Pressing the 1/2 button recalls driver 1 settings

- Pressing the 3/4 button recalls driver 2 settings

- Pressing other keypad buttons or not pressing a keypad button as a sixth digit does not set a driver and will not recall a memory setting

5. The doors lock then unlock to confirm the new code is programmed.

Erasing the Personal Codes

1. Enter the permanent factory keyless entry keypad code.

2. Press the 1/2 button within 5 seconds to activate the programming mode.

3. Within 5 seconds, press and hold the 1/2 button on the keypad for 2 seconds.

4. All personal codes are now erased and only the permanent factory keyless entry keypad code works.