Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2009 >> F 150 4WD V8-5.4L Flex Fuel >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair




Powertrain Control Module (PCM)













Removal

1. NOTE: Any PCM replacement will require that ALL customer keys are available to be reprogrammed at the time of installation. PCM replacement DOES NOT require new keys.

Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. Programming and Relearning

2. Disconnect the PCM electrical connectors.

3. Remove the bolts, the PCM and the gasket.

Installation

1. Install the gasket, the PCM and the bolts.
- Tighten to 9 Nm (80 lb-in).

2. Connect the PCM electrical connectors.

3. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. Programming and Relearning

4. Reprogram the Passive Anti-Theft System (PATS). Carry out the Key Programming Using Two Programmed Keys procedure. Using Two Programmed Keys

5. Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.

pro multis · About Operation CHARM