Second Row Seating

Seats

Second Row Seating

There are 2 seating options for the second row:

- 60/40 split bench
- 40/40 quad bucket seats

Each configuration's backrests will recline and fold flat, using the recliner handle at the side of each seat. When the backrest is folded flat, release and pull up again on the recliner handle and the seat will tip forward to ease entry to the third row of seating (E-Z entry). All 40/40 seats have an adjustable seat track in place of the stationary riser and power-fold to the E-Z entry position. The 40/40 quad bucket seats can be equipped with an optional heated seat system.


40/40 Power-fold Seats

The power-fold seats have convenient power-fold seat control switches mounted in each rear quarter trim panel beside the seat backrest. When the power-fold seat control switch is depressed and held for a moment, an electro-mechanical motor releases that seat's recliners and latch feet, through a cable attachment. An assist spring in the backrest recliner folds the backrest to the fold-flat position and a spring assist strut folds the seat to the E-Z entry position. The seat must be manually returned to the seating position.


40/40 Rear Heated Seats

NOTE: Always install a new foam pad and heater mat together.

This option allows independent electrical heating of each rear seat on demand.

The heated seat system contains the following serviceable components:

- Seat heater mats located on the seat cushions and backrests.
- Heated seat module located underneath the front floor console.
- Heated seat switches, located on the rear HVAC controls on the front floor console rear panel.
- Temperature sensors, located in the seat cushion heater mats.

A new heater mat must always be installed on a new foam pad and a heater mat must never be reused.