Auxiliary Blower Motor

Auxiliary Blower Motor









Removal and Installation

All vehicles

1. Remove the LH quarter trim panel.

Vehicles with power liftgate

2. Remove the 2 power liftgate motor assembly bolts and the power liftgate motor assembly nut. Position the power liftgate motor assembly aside.
- To install, tighten to 9 Nm (80 lb-in).





All vehicles

3. Disconnect the auxiliary blower motor electrical connector.

4. Remove the 3 auxiliary blower motor screws.

5. Remove the auxiliary blower motor.

6. To install, reverse the removal procedure.