Ignition Switch: Service and Repair

Ignition Switch









Removal and Installation

NOTICE: Do not remove the ignition lock cylinder and the ignition switch at the same time or damage to the column may result.

1. Depower the Supplemental Restraint System (SRS). For additional information, refer to Air Bag Systems.

2. Remove the steering column shroud.

3. Disconnect the ignition switch electrical connector.

4. Push the 2 locking tabs inward and remove the ignition switch.





5. To install, reverse the removal procedure.

6. Repower the SRS. For additional information, refer to Air Bag Systems.