Wiper Mounting Arm and Pivot Shaft

Wiper Mounting Arm and Pivot Shaft

Removal and Installation

1. Remove the cowl panel grille.

2. Remove the wiper mounting arm and wiper pivot shaft assembly in the following sequence.

1. Remove the 3 bolts.
- To install, tighten to 18 Nm (159 lb-in).

2. Disconnect the electrical connector.

3. Detach the wire harness pin-type retainer.





3. To install, reverse the removal procedure.
- Adjust the wiper pivot arms. For additional information, refer to Wiper Blade and Pivot Arm Adjustment - Windshield Adjustments.