Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2009 >> Fusion AWD L4-2.3L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Cellular Phone >> Communications Control Module >> Service and Repair >> Removal and Replacement >> Universal Serial Bus (USB) Cable and Port
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Universal Serial Bus (USB) Cable and Port




Universal Serial Bus (USB) Cable and Port

NOTE: Fusion, Milan shown, MKZ similar.










Removal and Installation

1. Remove the floor console.

2. Disconnect the Universal Serial Bus (USB) cable and port-to-bezel connector.

3. Remove the floor console rear trim panel by pulling straight back to disengage the clips.

4. NOTICE: Be careful not to flex the floor console RH side panel too much, or damage to the floor console may occur.

Remove the USB cable and port.

- Disconnect the USB cable and port-to-Accessory Protocol Interface Module (APIM) electrical connector.

- Carefully flex the floor console RH side panel and remove the USB cable and port.

5. To install, reverse the removal procedure.

pro multis · About Operation CHARM