Wheel Speed Sensor - Front

Wheel Speed Sensor - Front









Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the retainers and position the fender splash shield aside.

3. Disconnect the wheel speed sensor electrical connector.

4. Remove the 2 wheel speed sensor harness bracket bolts.
- To install:
- Tighten the bracket-to-wheel knuckle bolt to 23 Nm (17 lb-ft).

- Tighten the bracket-to-body bolt to 7 Nm (62 lb-in).

5. Remove the front wheel speed sensor bolt from the knuckle and remove the wheel speed sensor.
- To install, tighten to 23 Nm (17 lb-ft).

6. To install, reverse the removal procedure.