Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2009 >> Mustang V8-5.4L SC >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Column >> Service and Repair >> Steering Column Multifunction Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Column Multifunction Switch




Steering Column Multifunction Switch









Removal and Installation

Turn signal/headlamp switch and windshield wiper/washer switch

1. NOTE: The instrument cluster finish panel is held in place with retaining clips that are attached to the bezel.

Remove the instrument cluster finish panel.

2. Remove the floor console finish panel.

3. Remove the LH A-pillar lower trim panel.

4. Remove the left center stack wing.

5. Remove the 2 screws and the steering column opening cover.
- Disconnect the headlamp and courtesy light switch electrical connectors.

6. Remove the 4 bolts and the steering column opening cover reinforcement.
- To install, tighten to 9 Nm (80 lb-in).

7. Remove the upper steering column shroud by carefully pressing the sides inward.

8. Remove the 3 lower steering column shroud screws and the shroud.

Turn signal/headlamp switch

9. Disconnect the turn signal/headlamp switch electrical connector.

10. Remove the 2 screws and the turn signal/headlamp switch.

Windshield wiper/washer switch

11. Disconnect the windshield wiper/washer switch electrical connector.

12. Remove the 2 screws and the windshield wiper/washer switch.

Turn signal/headlamp switch and windshield wiper/washer switch

13. To install, reverse the removal procedure.

pro multis · About Operation CHARM