Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> E 150 V8-4.6L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Sensors and Switches - Ignition System >> Ignition Switch >> Service and Repair
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Ignition Switch: Service and Repair




Ignition Switch









Removal and Installation

1. Depower the Supplemental Restraint System (SRS). For additional information, refer to Restraint Systems.

2. Remove the steering column opening cover and the instrument panel LH knee bolster. For additional information, refer to Instrument Panel - Exploded View in Instrument Cluster / Carrier &/or Interior Moulding / Trim.

3. Disconnect the ignition switch electrical connector.

4. Remove the 2 ignition switch screws and the ignition switch.
- To install, align the ignition switch with the slot and index mark on the steering column and tighten the screws to 6 Nm (53 lb-in).

5. To install, reverse the removal procedure.

6. Repower the SRS. For additional information, refer to Restraint Systems.

pro multis · About Operation CHARM