Blower Motor Resistor
Blower Motor Resistor
Removal and Installation
Vehicles equipped with 4.6L, 5.4L or 6.8L engine
1. Disconnect the battery. For additional information, refer to Battery.
2. Remove the battery.
3. Remove the battery tray.
1. Remove the bolts.
2. Remove the battery tray.
- To install, tighten to 28 Nm (21 lb-ft).
All vehicles
4. Disconnect the blower motor resistor electrical connector.
5. Remove the blower motor resistor.
1. Remove the 2 screws.
2. Remove the blower motor resistor.
6. To install, reverse the removal procedure.