Audio Control Module (ACM)

Audio Control Module (ACM)

NOTE: 6-CD Audio Control Module (ACM) shown, others similar.











Removal and Installation

NOTE: It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to Audio Control Module (ACM) Self-Diagnostic Mode Audio Control Module (ACM) Self-Diagnostic Mode.

1. NOTE: Module configuration is required when a new ACM is being installed.

NOTE: Module configuration is not required for the Base AM/FM ACM.

Upload the ACM configuration information to the scan tool. For additional information, refer to Information Bus.

2. Remove the instrument cluster finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

3. Remove the 4 screws and the ACM.
- Disconnect the electrical connectors and antenna cable(s).

4. To install, reverse the removal procedure.
- Download the configuration information to the ACM. For additional information, refer to Information Bus.