Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Output Shaft Speed (OSS) Sensor

Output Shaft Speed (OSS) Sensor

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Disconnect the Output Shaft Speed (OSS) sensor electrical connector.

3. Remove the OSS sensor bolt and sensor.
- Remove the OSS sensor bolt.

- Remove the OSS sensor.

4. To install, reverse the removal procedure.
- Tighten bolt to 12 Nm (106 lb-in).