Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Brake Caliper Anchor Plate
Brake Caliper Anchor Plate
Removal and Installation
1. Remove the wheel and tire. For additional information, refer to Wheels and Tires.
2. NOTICE: Do not pry in the caliper sight hole to retract the pistons as this can damage the pistons and boots.
NOTICE: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.
Remove the 2 brake caliper guide pin bolts and position the caliper aside.
- Support the caliper using mechanic's wire.
- To install, tighten to 88 Nm (65 lb-ft).
3. Remove the brake pads and the stainless steel shims.
4. Remove the brake pad slides.
5. Remove the 2 brake caliper anchor plate bolts and the anchor plate.
- To install, tighten the new bolts to 133 Nm (98 lb-ft).
6. To install, reverse the removal procedure.
- Apply brakes several times to verify correct brake operation.