Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Horn: Service and Repair

Horn

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the 5 RH front fender splash shield screws.
- Pull the RH front fender splash shield downward to access the horn.

3. Disconnect the electrical connector.

4. Remove the bolt and the horn.
- To install, tighten to 10 Nm (89 lb-in).

5. To install, reverse the removal procedure.