Principles of Operation

Steering Column Switches

Principles of Operation

NOTE: The Smart Junction Box (SJB) may also be identified as the Generic Electronic Module (GEM).

Ignition Switch

The ignition switch is controlled by the ignition lock cylinder with a key. When the ignition cylinder is turned using the key, a mechanical connection positions the ignition switch to the selected position and allows the ignition switch to send voltage to specific components. The ignition switch is contained in the steering column lock module.

Key Removal Inhibit Solenoid

The key removal inhibit solenoid (also known as the key release interlock actuator) is an electronically controlled solenoid that prevents the ignition lock cylinder from being turned to the OFF position unless the selector lever is in the PARK position. The key removal inhibit solenoid is part of the ignition switch.

Multifunction Switch

The multifunction switch (flash-to-pass, high beam, turn signal, windshield wiper/washer and rear wiper/washer) controls the various components electrically. The multifunction switch is hardwired to the SJB and controls a ground signal for the high beam, flash-to-pass and turn signal functions. The multifunction switch is also hardwired to the smart wiper module and the rear wiper module, and controls a ground signal for the various wiper and washer functions.

For headlamp and turn signal concerns, refer to Lighting and Horns. For wiper and washer concerns, refer to Wiper and Washer Systems.