Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Pinpoint Test A: Inner Edge/Shoulder Wear
Wheels And Tires
Pinpoint Tests
Pinpoint Test A: Inner Edge/Shoulder Wear
This pinpoint test is intended to diagnose the following:
- Excessive toe out
- Incorrect wheel and tire rotation
PINPOINT TEST A: INNER EDGE/SHOULDER WEAR
-------------------------------------------------
A1 MEASURE THE TREAD DEPTH
- Using a tread depth gauge or similar tool, measure the inside edge/shoulder tread depth.
- Is the tread depth greater than 2/32 inch?
Yes
ROTATE the wheel and tire assemblies.
CHECK and ADJUST the toe to nominal +0.15 degrees (toe in). CHECK and ADJUST caster and camber to nominal. REFER to Suspension &/or Alignment.
No
INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to Suspension &/or Alignment.
-------------------------------------------------