Bumper - Front, Lower
Bumper - Front, Lower
1. Remove the front bumper cover. For additional information, refer to Bumper Cover - Front Removal and Replacement.
2. Remove the 2 nuts from the power steering cooler pipe-to-lower front bumper.
- To install, tighten to 7 Nm (62 lb-in).
3. Remove the 6 bumper-to-radiator support nuts (3 each side) and remove the lower front bumper.
- To install, tighten to 25 Nm (18 lb-ft).
4. To install, reverse the removal procedure.