C-Pillar Trim Panel

C-Pillar Trim Panel

Removal and Installation

1. NOTE: Inspect the safety belt D-ring cover for damage. If the safety belt D-ring cover does not remain in place, install a new cover.

Remove the safety belt D-ring cover and remove the safety belt bolt.

- To install, tighten to 54 Nm (40 lb-ft).

2. Remove the screw cover.

3. Remove the screw.
- To install, tighten to 9 Nm (80 lb-in).

4. Position the quarter trim panel aside to allow C-pillar trim panel removal.

5. Remove the C-pillar trim panel.
- Pull outward and downward to remove the panel.

6. To install, reverse the removal procedure.